Rolleiflex 3.5 E Planar image by Claudio Tebaldi (Image rights) |
1956 년부터 1965 년까지 몇 년 사이에 생산 된 형태의 중형 필름 TLR 카메라 입니다.
See also the article Rolleiflex.
Models[]
Rolleiflex 3.5 Ef (K4C)[]
Also known as model 3.5 C.
K4C Planar
- Produced between 1956-59 with quantity 26.000 units
- Serials 1.740.000-1.787.999, engraved above name plate.
- Taking Lens: Carl Zeiss Oberkochen Planar 3.5, 75mm filter Bayonet 2
- Built-in light meter
K4C Xenotar
- Produced between 1955-59 with quantity 17.000 units
- Serials: 1.850.000-1.898.999, engraved above name plate.
- Taking Lens: Schneider Xenotar 3.5, 75mm filter Bayonet 2
- Built in light meter is provisional
Both models:
- Film: 120 roll for 12 frames of 6x6cm and 35mm film with adapter Rolleikin 1 and plate film adapter.
- Finder lens: Zeiss or Schneider Heidosmat 2.8/75mm, filter Bayonet 2, interchangeable finder loupe, parallax control
- Shutter: Synchro-Compur MXV, with speeds 1-1/500, +B, X-sync, self timer.
- Film winding: lever with auto stop on first exposure, exposure counter for exposures 1-12, blank film pressure plate
Rolleiflex 3.5 E2 (K4C2) & 3.5 E3 (K4C3)[]
Rolleiflex 3.5 E3 image by Matt Phillips (Image rights) |
- Similar to 3.5F, but without built in metering
- Sold in UK & USA only
- Produced between:
- E2 1959-60, with quantity 2.010 units
- E3 1960-62, with quantity 2.000 units
- Serials:
- E2: E2-1.870.000 - E2-1.872.010 (first engraved above Rolleiflex name plate, later under taking lens).
- E3: E2-2.480.000 - E2-2.481.999 (engraved under taking lens)
- I am not sure the above contains valid information
- as I own a E3 model serial # 2384727 ( engraved above Rollei name plate )
- please revise.
Both Models:
- Taking Lens: Carl Zeiss Oberkochen Planar 2.8/80mm, and Schneider Xenotar 2.8/80mm, filter both Bayonet 2
- 35mm adapter: Rolleikin 2
- Shutter: Synchro Compur MX, 1-1/500, +B, X-sync, self timer.
- Prepared for built in exposure metering
Rolleiflex 2.8 E (K7E)[]
- Produced between 1956-59 with quantity 44.000 units
- Serials 1.621.000-1.665.999, engraved above name plate
- Taking Lens: Carl Zeiss Oberkochen Planar 2.8/80mm, and Schneider Xenotar 2.8/80mm, filter both Bayonet 3
- Finder lens: Zeiss or Schneider Heidosmat 2.8/80mm, Bayonet 3.
- Interchangeable focusing screen & finder loupe.
- Parallax control
- Dual-range uncoupled lightmeter
- Film: 120 roll for 12 exposure of 6x6cm, and 35mm with adapter Rolleikin 2
- Film winding: with lever with auto stop on first exposure, exposure counter for exposures 1-12. Blank film pressure plate.
Rolleiflex 2.8 E2 (K7E2) & 2.8 E3 (K7E3)[]
- 2.8 E2 is successor to model 2.8 E & parallel to model 2.8 F with optional metering
- 2.8 E3 Special order model for German & US market
- Produced between:
- 2.8 E2: 1959-60, with quantity 7.000 units
- 2.8 E3: 1962-65, with quantity 2.025 units
- Serials:
- E2-2.350.000-E2-2.356.999, engraved under taking lens
- E3-2.360.000-E2-2.362.024, engraved above Rolleiflex label
Both models:
- Film: 120 roll for 12 exposure of 6x6cm, and 35mm with adapter Rolleikin 2
- Taking Lenses: Carl Zeiss Oberkochen Planar 3.5/80mm, (for eastern Europe OPTON PI 2.8/80) and Schneider Xenotar, both filter Bayonet 3
- Finder lens: Zeiss or Schneider Heidosmat 2.8/80mm, filter Bayonet 3.
- Interchangeable focusing screen & finder loupe
- Parallax control
- Shutter: Synchro-Compur MXV, 1-1/500, +B, X-sync, self timer
- Film winding: with lever with auto stop on first exposure, exposure counter for exposures 1-12. Blank film pressure plate.
- Prepared for built in exposure metering.