Henry Araujo (talk | contribs) No edit summary |
Henry Araujo (talk | contribs) No edit summary |
||
| Line 1: | Line 1: | ||
| − | [[File:DSC02457.jpg|thumb|300px|right|Konica Radio Controller fitted to a Konica FT-1]] |
+ | [[File:DSC02457.jpg|thumb|300px|right|Konica Radio Controller receiver fitted to a Konica FT-1]] |
The '''[[Konica]] Radio Controller Set''' consists of a transmitter, a receiver, and a custom camera bracket. When the receiver is fitted to the accessory terminal connector on a Konica FS-1/FT-1 or (FC-1/FP-1 best used with optional Konica Auto Winder F), picture-taking may be remote-controlled at a distance about 230 ft. (70 m) on flat land. A number of cameras, as long as they are equipped with a receiver, may be simultaneously operated irrespective of the direction of the receiver or transmitter. |
The '''[[Konica]] Radio Controller Set''' consists of a transmitter, a receiver, and a custom camera bracket. When the receiver is fitted to the accessory terminal connector on a Konica FS-1/FT-1 or (FC-1/FP-1 best used with optional Konica Auto Winder F), picture-taking may be remote-controlled at a distance about 230 ft. (70 m) on flat land. A number of cameras, as long as they are equipped with a receiver, may be simultaneously operated irrespective of the direction of the receiver or transmitter. |
||
Revision as of 01:49, 13 September 2014
Konica Radio Controller receiver fitted to a Konica FT-1
The Konica Radio Controller Set consists of a transmitter, a receiver, and a custom camera bracket. When the receiver is fitted to the accessory terminal connector on a Konica FS-1/FT-1 or (FC-1/FP-1 best used with optional Konica Auto Winder F), picture-taking may be remote-controlled at a distance about 230 ft. (70 m) on flat land. A number of cameras, as long as they are equipped with a receiver, may be simultaneously operated irrespective of the direction of the receiver or transmitter.
Specifications
- Radio wave used: crystal controlled 49.860 MHz FM
- Frequency modulation: 7.5 KHz
- Semiconductors used: 4 transistors, 3 diodes (transmitter); 11 transistors, 5 diodes (receiver)
- Time lag: About 50ms between reception and camera shutter release
- Number of channels: 1 (transmitter); 1 (receiver)
- Antenna: 31.5 in. (80 cm) wire lead (transmitter); 11.8in. (30cm) five-stage rod (receiver)
- Distance for transmission and reception: About 230 ft. (70 m) on clear flat land with new alkaline batteries
- Power source: 2 AA alkaline batteries (transmitter); 2 AA alkaline batteries (receiver)
- Hours in continuous operation in normal temperature: 20 hours (transmitter); 60 hours (receiver)
- Others: transmission/reception ascertaining LED equipped
Konica Radio Controller Transmitter
Write the first section of your page here.
Section heading
Write the second section of your page here.