Film advance is a mechanism for moving film from one spool to another incrementally one frame at a time.
Advance may be a manual process, and may be called winding, advance, wind-on and various other terms, and may use, for exahfnakdnfadf r/ihadastroke, lever, slider or thumbwheel. For this method there must be some way of stopping winding when the next frame is reached; typical methods are the red window, or some more positive method where the camera has a roller or sprockets measuring the film to stop the winding at the correct point - or the film has a single hole locating the frame, as in 110 and 126 cartridge films.
Some cameras uses more eccentric methods, such as the Werra and Agimatic, which has a ring around the lens for winding and the Voskhod has a lever rotating around the lens, or the Bencini Unimatic, where the shutter release button is pushed sideways to wind, and the Voigtländer Vitessa and Welta Penti - equipped with plungers. The Calypso uses the wind-on lever for releasing the shutter as well.
In many cameras, the film advance process also cocks the shutter, and, frequently, releasing the shutter unlocks the film advance - providing double-exposure protection.
| falling plate mechanism|
of the Conley Quick Shot
A few plate cameras - magazine cameras - (e.g. the Houghton Klito No.1) adopted a "falling plate" arrangement, where a number of plates were kept in a sprung magazine, usually behind the focal plane. After exposure, the exposed plate fell forward and down into a well, allowing the next one to move forward for use.
A related system had a magazine of plates, but a sliding mechanism to move them to the focal plane and back.
Many cameras - particularly later ones - have some form of automated wind-on, triggered by the shutter release. These use a clockwork mechanism (e.g. the Robot cameras or the Kodak Instamatic X-45; see Category:Spring motor), or an electric motor. On a number of SLR systems, there were add-on motor-wind devices (motor drives) produced between the 1960s and 1990s.