Fujifilm nexia Q1 Zoom

The Fujifilm nexia Q1 zoom is an APS camera made in China for Fujifilm (Japan). When the camera is turned on, a motorized drive slides the built-in lens cover into the body and the lens automatically protrudes out. Two position zoom function is controlled by a lever behind the shutter release button, left for wide and right for telephoto.

An LCD panel on the back just under the viewfinder will give the following information; Three levels of battery condition display, full, half, need replacement. Film cartridge loaded display with three levels, no display = no film cartridge loaded, steady display = film loaded, blinking display = fully used film cartridge. Frame number. Flash ready symbol, will blink when charging and remain on steady when ready.

Type: Point and Shoot

Film: APS 100-800 ISO

Picture Size: 16.7mm x 30.2mm

Print Format: C type (classic)

Lens: Fujinon zoom lens, 2 components, 2 elements, f=22-44mm 1:8-1:12

Viewfinder: Inverted Galilean viewfinder, 0.38-0.68 X magnification, With AF lamp

Focusing: Active type auto-focus, wide-angle 0.6m (2.0ft.)- inf., telephoto 1.0m (3.3ft.)- inf., with AF lock, AF lamp

Shutter Release: Electronic shutter release, 1/100 sec., 1/30 sec.

Exposure control: 2 zone switching

Film Loading: One touch drop-in loading system, film safety lock system, with mechanical double exposure prevention

Film Advance: Automatic (motorized) film wind and rewind system, provision for mid-roll rewinding (use the mid-roll rewind button)

Flash: Automatic flash, 6 seconds recycle time, with red-eye reduction (LED pre-flash)

Battery: one CR2 lithium


Fujifilm nexia Q1 ZOOM


Write the first section of your page here.

Section headingEdit

Write the second section of your page here.

Community content is available under GFDL unless otherwise noted.